These trailers are designed to carry three dinghies on their trolleys. the top two boat needs lifting onto the top level, and depending on the weight of the boat will need numerous people to raise the boat up to the top level. The bottom boat will roll on the full width rear roller and can be loaded single handed. There is a double mast support at the front to support two masts. the rear of the mast will need to be supported on the rear of the uppermost boat.
The triple stacker is adjustable in height to handle different heights of dinghy. The height is set by loosening the U bolts and raising or lowering the top deck. The length of the trailer can be set to different lengths. This model can take trolleys from 190 size to 275 size. The length is set by loosening the u bolts and the removing the M12 bolts setting the overall length. The trailer can be stretched or compressed to desired length. The Position of the axle is best set at this time. The axle position can be set set the nose weight of the trailer.
There are numerous different options These include
Wheel size 10 inch or 13 inch
Braked or Unbraked
Extended drawbar to allow for clearance for bike racks or large 4×4 rear doors
This is only needed on unbraked trailers as braked trailers already have an extended hitch
Wide versions for wide boat such as Merlin Rockets RS 400 and Wayfarers
Use the drop down menus to choose the desired version.
Not all versions are listed on the drop down menu.
please phone the office if you required options are not listed.
